Abstract：ObjectiveTo investigate the status of occupational hazards in workplace, analyze critical control points from a Taiwanese golf products enterprise, so providing a basis for formulating protective strategy of occupational hazard. MethodsThe occupational hazardous substances were monitored on the basis of GBZ159-2004 specifications. Occupational sanitary survey and detection of occupational disease factors were used to comprehensively assess critical control points. Results The main occupational hazard factors were noise, hand-transmitted vibration, high temperature, silica dust, grinding wheel dust, particles not otherwise regulated,welding fume, acetone, n-heptane, ethyl acetate, butyl acetate, n-butyl alcohol, trichloroethylene, benzene, toluene and xylene et al. The unqualified occupational hazards included noise 、vibration、silica dust、grinding wheel dust、particles not otherwise regulated、high temperature and welding fume. The rates exceeded occupational exposure limits in turn were 59.2%、50.0%、80.0%、36.4%、13.3%、22.2% and 25.0%. Concentrations or intensities of other hazard factors were all below occupational exposure limits. ConclusionsThere are many kinds of occupational hazards in the golf products enterprise. The critical control points of occupational hazards are the sand-blasting operation, the large cutting operation, the small cutting operation, the grinding gate operation, the polishing operation and the shell-shocking operation . Comprehensive prevention and control measures should be taken to control occupational hazards, so as to prevent occupational diseases.
2016, Vol. 23 
